Product Details:
Automation Grade | Semi-Automatic |
Voltage | 220-440 V |
Material | Mild Steel |
Capacity | 10-50 Kg/hr. |
Phase | 3 Phase |
Frequency | 50 Hz |
Driven Type | Electric |
Packaging Type | Cartons, Cans, Bottles, Barrel, Bags |
FEATURES
Ø Two single wound films are placed on to the upper and lower side film carriage rollers
Ø Top and bottom motorized film drive and relevant film advance balancer attachments
Ø Direct driven infeed belt for automatic infeed
Ø Max seal bar height: 400mm
Ø Automatic discharge belt until heat tunnel
Ø Photo eye control for package infeed
Ø Constantly sealer bar to give two seals with a center cut fitted with a cartridge heater
Ø Digital temperature controller to give consistency of seal with a thermocouple control
Ø Pneumatic cylinder and double heavy duty linear bearings for accurate motion
Ø Easy to change rubber and Teflon set on the bottom jaw
Ø PLC programmed software for customized inquiries and flexibility
Ø Detection sensor against package or hand entrapment
Ø Optional holder to keep the package steady during sealing by soft vertical cylinder
Ø Maximum height adjustment for the jaw
Ø Complete closed housing with limit switch controlled windows for security
Ø Perfect tunnel design in heating room insulation and optimized energy consumption
Ø Connectable to any shrink packaging line.
Ø Smooth product transfer through the tunnel conveyor.
Ø Speed controller for conveyor and heat adjustment for powerful shrinkage at PE films
Ø Secondary and emergency heat controller for safety regulation
Ø Air flow control flaps with handle for shrink tunnel
Ø Post cooling switch to cool down to 70ºC before switch off
Ø Silicon coated tunnel conveyor bars for perfect heat insulation
Ø Two layer design heating room to minimize the energy losses
Ø Together with standard casters for easy moving
Ø Optional wire belt or Teflon mesh belt can be applied upon request
Product Details:
Usage/Application | Industrial |
Automation Grade | Automatic |
Voltage | 220-440 V |
Material | Mild Steel |
Capacity | 10-50 Kg/hr |
Phase | 3 Phase |
Frequency | 50 Hz |
Air requirement | 6 bars @ 200 litres/min |
FEATURES
Ø Two single wound films are placed on to the upper and lower side film carriage rollers
Ø Top and bottom motorized film drive and relevant film advance balancer attachments
Ø Direct driven infeed belt for automatic infeed
Ø Max seal bar height: 400mm
Ø Automatic discharge belt until heat tunnel
Ø Photo eye control for package infeed
Ø Constantly sealer bar to give two seals with a center cut fitted with a cartridge heater
Ø Digital temperature controller to give consistency of seal with a thermocouple control
Ø Pneumatic cylinder and double heavy duty linear bearings for accurate motion
Ø Easy to change rubber and Teflon set on the bottom jaw
Ø PLC programmed software for customized inquiries and flexibility
Ø Detection sensor against package or hand entrapment
Ø Optional holder to keep the package steady during sealing by soft vertical cylinder
Ø Maximum height adjustment for the jaw
Ø Complete closed housing with limit switch controlled windows for security
Ø Perfect tunnel design in heating room insulation and optimized energy consumption
Ø Connectable to any shrink packaging line.
Ø Smooth product transfer through the tunnel conveyor.
Ø Speed controller for conveyor and heat adjustment for powerful shrinkage at PE films
Ø Secondary and emergency heat controller for safety regulation
Ø Air flow control flaps with handle for shrink tunnel
Ø Post cooling switch to cool down to 70ºC before switch off
Ø Silicon coated tunnel conveyor bars for perfect heat insulation
Ø Two layer design heating room to minimize the energy losses
Ø Together with standard casters for easy moving
Ø Optional wire belt or Teflon mesh belt can be applied upon request